Table of Contents
Advertisement
Production
Three types of Autosave are available:
Autosave fixed
–
The files are saved on a storage medium in the ".bmp" format. The resolution of the
images is automatically adapted to the preset number of images, even if less images
are actually saved. This guarantees that the storage capacity of the storage medium is
sufficient for the order.
Autosave quality
–
The images are saved either in ".bmp" or ".jpg" format (various compression factors
can be selected) on a storage medium or in a shared folder on an external PC. Four
different resolutions can be selected.
d-workflow
–
As in Autosave quality the images can be saved in the formats ".bmp" or ".jpg"
(again in various compression factors). Four different resolutions can be selected. For
further processing the images are sent to the Server-PC (only possible if the Minilab is
operated in a network; see
Chapter 4 as well as
Applies only to d-lab.2/2plus
In case of films the DX code is transmitted to the d-workflow as part of the file name:
File name = DX code_consecutive number.
6.7.1
Printing and Saving Images
6-100
2005-05-01 / PN 04092_01
Defining and Editing Autosave Configurations
Settings for Remote Orders: Autosave
d-lab.2, d-lab.2plus, netlab.2plus: Operation
in
in Chapter 6).
Call up the print mode (see
this chapter).
Select the order configuration,
which includes an Autosave configuration
–
Defining and Editing Autosave
(see
Configurations
Order Configurations
in which PpF (prints per frame) > 0 (if this
–
is not the case, set PpF on a value > 0 for
this order; see
Configuration for All Images of an Order
this chapter).
Then proceed as described for the respective
print mode (see
Printing
in
Defining and Editing
and
in Chapter 4), and
Changing the
Printing
in this chapter).
AgfaPhoto
in
Advertisement
Table of Contents
