Maintenance
8.4.8
Cleaning the Chemical Filters
Purpose:
To ensure uniform circulation of the processing solutions by cleaning of the filters.
Special tools
– Soft brush
CAUTION!
Observe the safety instructions for the handling of chemicals
Safety Information
(see
CAUTION!
Risk of injury if the wet section cover is unlocked unintentionally or without
paying attention, and then drops back down.
dlab2510b
8-34
2005-05-01 / PN 04092_01
in Chapter 3).
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Open the Paper Processor cover until it
engages.
Remove the chemical filters and clean them
with warm water and a soft brush.
Put the chemical filters back in the color-
marked order.
Close the cover of the Paper Processor.
AgfaPhoto