Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
The Slide film screen opens. It displays:
Order number
–
Default configuration for the inserted film carrier and various information of this
–
configuration
Field for the display of a scanned slide
–
Several buttons
–
Prior to inserting the first reversal film strip / unmounted single slides:
the order number can be changed (only if Order number manual has been selected in
–
Change Order Numbers
the settings): see
another configuration for the complete order can be selected (see
–
Another Configuration for the Complete Order
the selected configuration can be changed for the current order (see
–
Configuration for the Complete Order
Note
The configuration can only be selected or changed before a reversal film strip / single
unmounted slide is inserted, i.e. the images of an order are all printed with the same
configuration.
6.3.6.2 Image Editing and Printing
Several reversal film strips / single slides can be combined in one order. Insert all
corresponding reversal film strips / single slides of an order and print as described below.
Insert and position reversal film strips / single slides
The first frame of the film strip is displayed; in case of a single slide only the scanned part
of the slide is shown. It must then be positioned correctly.
AgfaPhoto
in this chapter.
in this chapter)
in this chapter)
Selecting
Changing the
Insert the slide(s).
Insert film strips with at least two slide
frames / complete reversal films via the
film feeder:
They are pulled in, scanned, and
positioned on the film tip.
unmounted single slides: Pull out the
film carrier, put in the slide frame, and
push in the carrier.
2005-05-01 / PN 04092_01
Production
6
6-77
Advertisement
Table of Contents
