Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.4.8
Other Settings
The production requires a number of further settings which have been combined in the
screen Other settings:
General settings:
Lab-ID
–
Laboratory name
–
Automatic or manual allocation of order numbers
–
Activate / deactivate backprint
–
(only for d-lab.2/2plus)
Settings for negative printing:
Activate / deactivate automatic end of order
–
Check number of prints per frame (for APS and others)
–
Settings for digital orders:
Maximum number of prints for closing a digital order
–
Activate / deactivate dTFS
–
Autosave settings:
It is possible to define if images in Autosave (see
–
Chapter 6) are to be saved with manual corrections (see
Red-eyes corrections will not be saved.
039
AgfaPhoto
Saving images with Autosave
Printing
in Chapter 6).
Call up:
Press in this order:
Settings
Machine settings
Other settings
The screen Other settings opens.
Enter the changes as described in the
paragraphs below.
Once all changes have been made:
Press Save.
2005-05-01 / PN 04092_01
Settings and Configurations
in
4
4-43
Advertisement
Table of Contents
