Sorter - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
2.3.6

Sorter

G_GG214 (Fig. shows d-lab.2)
After drying, the prints up to a certain size (see below) exit via the print chute (1) into the
sorter (2) where they are sorted by orders and stacked in buckets. Larger prints are put on
the tray for large prints formats (3).
Maximum sizes for deposit in sorter buckets:

10" Sorter:

prints up to 254 mm (10") in length
6" Sorter: prints up to 152 mm (6") in length
Special cases:
If an order exceeds the capacity of a bucket (55 prints for sizes up to 13x18 cm (5x7"),
–
43 prints for sizes bigger than 13x18 cm), the sorter moves on to the next bucket, i.e.
the prints of one order may be in two or more buckets.
Splices in the paper rolls are cut separately and the respective pieces of paper are
–
deposited in the print order stack.
AgfaPhoto
General Description, Work Routines and Operation
3
1
2
2005-05-01 / PN 04092_01
2
2-13