Indexprint Configurations; Importing Indexprint Layouts - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.7.3

Indexprint Configurations

Index print configurations are used for the printing of index prints To be able to print
index prints the index print layouts must be available on a Minilab. Some layouts are
already included in the machine upon delivery. Further index print layouts can be created
on a PC/workstation with the AgfaPhoto IP Layout Software and then imported in the
Minilab.

4.7.3.1 Importing Indexprint Layouts

Note
Index print layouts can only be imported if the import software on the Minilab has been
Installing / Activating Software
activated (see
Note
Only layouts of the AgfaPhoto IP Layout Software 5.08 or higher can be imported.
092
AgfaPhoto
in this chapter).
Call up:
Press in this order:
Settings
Machine settings
Indexprint layout
The screen Import index print layouts opens.
Applies to d-lab.2/2plus
Select Film mask (filter).
If No filter is selected all the available
layout files will be displayed in the list of
imported layouts.
If you select a film mask only those layout
files which match the film mask will be
shown.
The file extensions of the layout files refer to
the film carriers, e.g. .135, .240.
Applies to netlab.2plus
Film mask is fixed: File print
Select a Drive and in the next screen the Folder,
if necessary, in which the layout files to be
imported are stored.
Layout files which can be imported are
shown in the left-hand listing.
2005-05-01 / PN 04092_01
Settings and Configurations
4-93
4