Troubleshooting
7.7.7
Paper Jam in the Lane Distributor (LD)
Applies to d-lab.2
dlab2013
7-24
2005-05-01 / PN 04092_01
1
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Open the Printer front door.
Open the locking (fastening screw) and pull
out the lane distributor towards the front.
Remove the guide plates: pull two push
buttons (1) each to open them.
Remove the paper.
Insert the guide plates again and press in
the push buttons.
Push in the lane distributor and tighten the
fastening screw (red).
Close the Printer front door.
AgfaPhoto