Table of Contents
Advertisement
Troubleshooting
7.8.8
Paper Jam between Sheet Distributor SD and Sheet Transfer ST
Applies to d-lab.2plus/netlab.2plus
4
G_GG121b
7-40
2005-05-01 / PN 04092_01
2
3
1
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Unlock the pin (1, red) (by pulling).
Remove the cover (2).
Lift the sheet transfer (ST) holding it by the
handle (3) and take it out.
Remove the paper.
Verify that all belts are positioned correctly.
Mount the unit again.
Observe the two engaging lugs (4).
Mount the cover (2).
Pull out the locking pin (1, red), to let the
cover engage, and then release again.
AgfaPhoto
Advertisement
Table of Contents
