Safety Notes And Rules; General - AgfaPhoto d-lab.2 8060/260 Operation Manual

Introduction
1.6

Safety Notes and Rules

1.6.1

General

A principle condition for safe handling and correct operation of the Minilab is the
understanding of safety notes and safety rules. This manual includes the important
information for safe operation of the equipment. The Operation Instructions, especially the
safety notes must be observed by all persons working on the Minilab.
Furthermore all rules and regulations regarding the prevention of accidents at the
operation site must be followed.
The minilabs are available with the following laser types:
Machines with gas laser:
d-lab.2
d-lab.2plus
Machines with solid state laser:
d-lab.2 select
d-lab.2 basic
d-lab.2 (70mm)
d-lab.2plus select
d-lab.2plus basic
d-lab.2plus (70mm)
netlab.2plus basic
In order to prevent damage caused by the laser beam, the latter is encapsulated in the
machine so that the whole machine can be classified as Laser Class 1 Product.
The laser beam cannot hit the operator when the Minilab is operated under normal
conditions, not even when the machine doors are open.
Structure of the laser classification within the machine:
Complete machine:
Argon laser or solid state laser respectively:
Color laser recorder:
Print Engine, PE (d-lab.2) or
Print Machine, PM (d-lab.2plus, netlab.2plus)
respectively:
The above-mentioned components have labels attached (see
Machine Labels
in this chapter).
WARNING!
Never remove or open covers on the machine as this may be dangerous.
A laser beam of class 2 may be accessible after the removal of covers.
1-10 2005-05-01 / PN 04092_01
Type 8060/260
Type 8060/261
Type 8060/803 and Type 8060/804
Type 8060/270 and Type 8060/272
Type 8060/157 + 8060/255
Type 8060/813 and Type 8060/814
Type 8060/271 and Type 8060/273
Type 8060/158 + 8060/255
Type 8060/505
Laser Class 1
Laser Class 2
Laser Class 2
Laser Class 2
Warnings and Notes on
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto