Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.3.6
Paper Codes according to AgfaPhoto Standard
The paper magazines have four slides for the paper width coding (slide 1–4) and two
slides for paper surface coding (slide 5 and 6). This allows coding of 15 paper widths and
four surfaces (the combination with all slides 1–4 open cannot be used).
The table shows the AgfaPhoto standard for the codes. Other codes can also be used,
however, each combination can only be used once.
The slides 1–6 correspond to the switches 1–6 in the screen Paper settings and Surfaces.
Their meaning is:
switch on / slide on paper magazine closed
■ switch off / slide on paper magazine open
following page
* see
Switch / slide
Paper width
3.25 inch
(82 mm) *
3.50 inch
(89 mm)
3.75 inch
(95 mm)
4.00 inch
(102 mm)
4.50 inch
(114 mm) *
4.75 inch
(120 mm)
5.00 inch
(127 mm)
6.00 inch
(152 mm)
6.50 inch
(165 mm)
7.00 inch
(178 mm)
8.00 inch
(203 mm)
8.25 inch
(210 mm)
8.50 inch
(216 mm)
10.0 inch
(254 mm)
11.0 inch
(279 mm)
12.0 inch
(305 mm)
Surface
Glossy
Matt
User defined 1
User defined 2
AgfaPhoto
1
2
3
Settings and Configurations
4
5
2005-05-01 / PN 04092_01
4
6
4-17
Advertisement
Table of Contents
