Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.5.9
Setting Color and Density Corrections (Digital)
Effect
Note
Applies only to d-lab.2/2plus
Color / density corrections for color negatives: see
Setting Color and DX Corrections (for color negative)
There one regulator per color pair blue–yellow, green–magenta, red–cyan and one for
density. The effect depends on the setting of the impact parameter (see
Correction Impact (for color negative and digital)
Adjustment range:
Step width:
Standard setting:
Note
The corrections made here will not be included in the back print.
Making changes
4.5.10 Activating / Deactivating the Contrast Management (only for Color Negative)
Applies only to d-lab.2/2plus
This switch activates / deactivates the contrast parameters Detail contrast and Area
contrast.
4.5.11 Automatic red eyes correction (for color negatives and digital)
When taking flash shots of persons you cannot always avoid that the pupils of the eyes
come out red (depending on the exposure conditions and camera equipment). (Reflex of
the blood circulation in the retina) The red-eye correction automatically changes the pupil
color to produce a natural effect in the picture.
AgfaPhoto
in this chapter.
in this chapter).
-9 to +9
1
0
Settings and Configurations
Setting the
Press the left or right Arrow button at the
color settings Yellow, Magenta, Cyan or
Density in the Production balance digital
screen to decrease or increase the colors or
density.
Note
If all three colors are moved in the same
direction and by the same extent, this has not
effect on the general color impression.
Press the Contrast management button in
the Production balance screen to activate /
deactivate the function.
2005-05-01 / PN 04092_01
4
4-61
Advertisement
Table of Contents
