Selecting Another Configuration For The Complete Order; Selecting Another Configuration For Individual Images Of An Order Applies Only To D-Lab.2/2Plus; Selecting Another Configuration For Individual Images Of An Order; Applies Only To D-Lab.2/2Plus - AgfaPhoto d-lab.2 8060/260 Operation Manual

Production

6.1.6.5 Selecting Another Configuration for the Complete Order

Note
The function is not available in the print mode Network order.

Applies only to d-lab.2/2plus

Reorder print mode the configuration is changed differently than described
In the
Working with Reorder Print Mode
below (see
042_konf

6.1.6.6 Selecting Another Configuration for Individual Images of an Order

Applies only to d-lab.2/2plus
This function is only available in the Manual positioning mode, here another
configuration can be called up for each scanned image (see
Positioning Mode
in this chapter).
6-18 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
in this chapter).
Press the Show configuration button.
Applies to d-lab.2/2plus
The indicated list contains all configurations
defined for the inserted film carrier.
Applies to netlab.2plus
The indicated list contains all defined
configurations.
Note
An asterisk (*) identifies order configurations
which can be printed with the inserted paper.
"P" refers to package configurations
"C" identifies Combiprint configurations.
Select the desired configuration from the
list.
Press ok.
Working in Manual
AgfaPhoto