Table of Contents
Advertisement
Maintenance
8.5.6
Cleaning the Processing Racks
Purpose:
To ensure optimum processing quality.
CAUTION!
Risk of injury if the wet section cover is unlocked unintentionally or without
paying attention, and then drops back down.
CAUTION!
Observe the safety instructions for the handling of chemicals (see
instructions
in Chapter 3).
WARNING!
Only clean the racks when the machine is switched off! Risk of electric shock if
the liquid is spilled.
2
dlab2519 (Fig. shows d-lab.2/2plus)
1 and 2
Splash guards
8-48
2005-05-01 / PN 04092_01
1
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Safety
Open the Paper Processor cover until it
engages.
Splashes of the chemicals may stain the
covers, so do use the splash guard (1) or
remove splashes immediately with
Remove the CD feed unit (Color Developer),
the tank crossovers and the squeegee unit.
Paper Processor: Cleaning the CD
(See
Feed Unit, Tank Crossovers, and the
Squeegee Unit.
)
The CD solution must not be contaminated
by BX (bleachfix), for this reason, put the
splash guard (2) on the CD rack.
water.
AgfaPhoto
Advertisement
Table of Contents
