Defining And Editing A Combiprint Configurations - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation

4.7.7.2 Defining and Editing a Combiprint Configurations:

Note
Combiprints cannot be priced separately. If special prices are to be defined for this, we
recommend to use a paper format which is usually not used.
352
AgfaPhoto
Settings and Configurations
Select the layout files to be imported:
Press the double-arrow to import all files, or
select individual files and press the single
arrow.
Import the selected layout files with OK.
The Combiprint configurations screen opens.
Applies to d-lab.2/2plus
Select Film mask.
Configurations created before and matching
the film carrier are listed.
Applies to netlab.2plus
Film mask is fixed: File print.
The listing shows configurations created
before.
If you want to define a new combi-print
configuration:
Press New.
If an existing combiprint configuration is to
be edited:
Select the combi-print configuration to be
edited from the list and press Edit.
2005-05-01 / PN 04092_01
4
4-107