Preparing The Machine For Different Orders; Changing The Paper Magazine And Loading Paper - AgfaPhoto d-lab.2 8060/260 Operation Manual

Production
6.2

Preparing the Machine for Different Orders

6.2.1

Changing the Paper Magazine and Loading Paper

Note
The paper must be taken out of the cool storage at least 24 hours before use so that
possible condensation may dry again.
The Minilab holds two paper magazines. The magazines accept papers of the following
widths:
Minilab
d-lab.2
d-lab.2plus, netlab.2plus
The paper is inserted in the d lab.2 in several steps which are explained in detail in the
following paragraphs:
6-26 2005-05-01 / PN 04092_01
Paper magazine
left hand paper magazine
right hand paper magazine
left hand paper magazine
right hand paper magazine
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Paper width
82–210 mm
82–305 mm
82–305 mm
82–305 mm
Remove the paper magazine.
Take out any paper, if necessary, in the
darkroom.
If paper of a different width is to be loaded,
set the paper magazine to the desired paper
width.
Go to a darkroom to load the paper in the
paper magazine.
Set the magazine code for paper width and
surface.
Insert the magazine in the Minilab.
Cut the leading paper edge, if necessary
(automatic function).
3.25– 8.25 inch
3.25–12.00 inch
3,25–12,00 inch
3,25–12,00 inch
AgfaPhoto