Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
6.3.1.3 Autoprint with Preview
402
The film / film strip is pulled in and scanned, the screen Autoprint with preview opens.
The screen shows the preview images (maximum four images at the same time). The
display already considers the corrections of the selected configuration. Information about
the current configuration is shown below the row of preview frames.
The preview frames move automatically in the set preview frequency (see
Users and User Rights / Preview Frequency
shown in the far right position, it becomes active; the buttons Stop and Skip can be used:
AgfaPhoto
After calling up the Autoprint mode:
in Chapter 4). As soon as the first image is
2005-05-01 / PN 04092_01
Activate Preview on.
Insert a film / film strip.
Defining
Production
6
6-35
Advertisement
Table of Contents
