Defining And Editing A Front Print Configuration - AgfaPhoto d-lab.2 8060/260 Operation Manual

Settings and Configurations
4.7.6

Defining and Editing a Front Print Configuration

By means of these Front Print configurations free texts can be exposed on the front of the
print.
Applies only to d-lab.2/2plus
Moreover, in case of IX240 films the date of the magnetic strip on the film (the date
entered via the camera) can be exposed.
301
4-104 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Call up:
Press in this order:
Settings
Print configurations
Front print
The Front print configurations screen opens.
Applies to d-lab.2/2plus
Select Film mask (Standard front print or
IX240 front print).
Applies to netlab.2plus
Film mask is fixed: Standard front print
If you want to define a new front print
configuration:
Press New.
If you want to edit an existing front print
configuration:
Select the front print configuration to be
edited from the list and press Edit.
AgfaPhoto