Printing; Working With The Autoprint Mode; Applies Only To D-Lab.2/2Plus; Activating The Print Mode And Selecting A Configuration - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
6.3

Printing

6.3.1

Working with the Autoprint Mode

Applies only to d-lab.2/2plus

6.3.1.1 Activating the Print Mode and Selecting a Configuration

009_start
The screen Autoprint without preview opens. It displays:
Order number
–
Default configuration for the inserted film carrier and various information of this
–
configuration
Several buttons
–
Prior to print start:
the order number can be changed (only if Order number manual has been selected in
–
Change Order Numbers
the settings): see
the selected configuration can be displayed (see
–
this chapter)
another configuration can be selected (see
–
Complete Order
in this chapter)
the selected configuration can be changed for the current order (see
–
Configuration for the Complete Order
the preview function can be activated
–
AgfaPhoto
in this chapter.
Display Current Configuration
Selecting Another Configuration for the
in this chapter)
Press in this order:
Print mode
Autoprint
in
Changing the
2005-05-01 / PN 04092_01
Production
6
6-33