Setting The Correction Impact (For Color Negatives And Digital) - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

Settings and Configurations

Setting the Correction Impact (for Color Negatives and Digital)

Basic machine setup for the changes in color and density for the entire production. This

setup only has an effect on color/density corrections, i.e. in all screens with regulators for

yellow, magenta, cyan, and density.

Adjustment range:

A setting of 100% should result in a correction density step of about 0,5 D and a color

step of about 0,25 D on the paper. The parameter changes are linear: 50% halves, 200%

doubles the effect. The exact influence of the impact setting depends on the paper

We recommend to change the correction impact only once in order to adjust the fine

grading or the extent of the correction to personal requirements. All further corrections,

e.g. seasonal changes (dominant colors green or white) should not be made via the

correction impact, but via corrections made during printing. These corrections can then

be selected for the back print and thus are easier to follow up.

Making changes

2005-05-01 / PN 04092_01

d-lab.2, d-lab.2plus, netlab.2plus: Operation

Press the Impact button in the Production

balance screen or the screen Production

balance digital and enter the required