Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.9
Deleting a Print or Order Configuration
Note
Sub-configurations can only be deleted if they are not used in a higher configuration.
If you want to delete a configuration, which is used in a higher configuration, e.g.
– a sub-configuration in any order configuration, or
– a single order configuration in a package order configuration,
the sub-configuration in the higher configuration must first be replaced by another one
Defining and Editing Order Configurations
(see
AgfaPhoto
in this chapter).
Call up:
Press in this order:
Settings
Print configurations
Desired configuration type
Applies only to d-lab.2/2plus
If necessary, select Film mask or Film type.
Press the configuration to be deleted in the
listing.
Press Delete.
2005-05-01 / PN 04092_01
Settings and Configurations
4-127
4
Advertisement
Table of Contents
