Defining And Editing Correction Configurations - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

d-lab.2, d-lab.2plus, netlab.2plus: Operation

Defining and Editing Correction Configurations

The Minilab offers a number of possibilities to improve the image. These settings can be

combined and saved in special configurations, e.g. for certain groups of motifs, such as

snow exposures.

Settings and Configurations

Press in this order:

Print configurations

The Correction configurations screen opens.

Applies to d-lab.2/2plus

Press Film type.

Correction configurations already set up for

this film type are displayed.

Select the desired film type from the list

(color negative, BW, slide or file print),

confirm selection with OK.

Applies to netlab.2plus

Film type is fixed: File print.

Correction configurations created before are

If you want to define a new correction

configuration:

If you want to edit an existing correction

configuration:

Select the correction configuration to be

edited from the list and press Edit.

2005-05-01 / PN 04092_01