Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Production
6.1.2.3 Order Configurations
Order configurations are settings on the machine which are used to produce a certain
print result of an image material (paper format, back print, probably index print etc.). For
each print mode you want to use at least one order configuration must be set up (see
Configuration Types for Print Orders
Defining and Editing Order
in this chapter, as well as
Configurations
in Chapter 4).
Every print mode has a standard order configuration assigned which is called up
Select Order Configuration as
automatically together with the print mode (see
Standard
in Chapter 4). If several order configurations are available for a selected print
mode, each one of these configurations can be selected for an order (see
Choosing
Another Configuration for the Complete Order
in this chapter).
6
6.1.2.4 Changing to another print mode
Only one print mode can be used at a time. It is not possible to open several windows
concurrently for different print modes.
If you change to another print mode, the default order configuration for this print mode is
automatically activated.
Applies to d-lab.2/2plus
If a new order is started within a mode the configuration used last remains active, except
in the modes Reorder and Network order. In case of Reorder the system changes to the
default configuration after every order.
Applies to netlab.2plus
If a new order is started in the print mode File print, the configuration setting used last
will be kept (not in print mode Network order.
AgfaPhoto
2005-05-01 / PN 04092_01
6-5
Advertisement
Table of Contents
