Table of Contents
Advertisement
Settings and Configurations
4.5
Adjusting the Production Balance
Basic settings for different parameters, which are important for the production, e.g. Detail
/ Area contrast, Sharpness – edges / Sharpness – grain, Saturation, Color corrections, etc.
Applies only to d-lab.2/2plus
The settings are to be made separately for film (color negatives, black-and-white
negatives) on the one hand and digital sources on the other hand. The settings have no
effect on slides.
After changes in the settings the machine executes an automatic restart of the program.
102
4-50
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Call up:
Press in this order:
Settings
Machine settings
Production balance
The screen Select production balance opens.
Applies to d-lab.2/2plus
If the production balance is to be adjusted
for film material (color negatives and
black&white negatives), press Color
negative.
If the production balance is to be adjusted
for digital material, press Digital.
Applies to netlab.2plus
Press Digital.
Confirm the selection with OK.
AgfaPhoto
Advertisement
Table of Contents
