d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.4.4
Installing / Activating Software
The software of the Minilab contains some additional programs which can only be used
after special activation:
Pricing
–
Saving statistics
–
Import index print layouts (to print index prints; some preset layouts are included per
–
default)
Import combi-print layouts (to print combi-prints; some preset layouts are included per
–
default)
Red eye correction
–
Printing of reversal film strips
–
Scratch correction for slides (mounted slides and reversal film strips)
–
Clickrate
–
Further software can be installed from CD (e.g. update of the machine software).
Note
Prior to the software installation or activation the settings must be saved (see
and Load Settings and Configurations
4.4.4.1 Activating Software
063
AgfaPhoto
in this chapter).
Settings and Configurations
Save
At first the license for the desired software must
be obtained:
Call up License ID: Press in this order:
i
Version Info
The Version Info screen opens.
Note the license ID (shown on the screen
bottom left).
Order the option from AgfaPhoto, specify the
license ID.
AgfaPhoto then provides an alphanumeric code,
which must be typed in during installation (see
below
).
2005-05-01 / PN 04092_01
4
4-27