Table of Contents
Advertisement
Troubleshooting
7.8.10 Paper Jam between dryer and outlet unit
Applies to d-lab.2plus/netlab.2plus
If a paper jam occurs between dryer and outlet unit, there is a risk that large format prints
damage the foam rollers of the dryer.
To prevent this proceed as follows:
G_PP108
7-42
2005-05-01 / PN 04092_01
2
1
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Remove the dryer cover. Use a coin to turn
the lock by 90º.
Loosen the locking screw (knurled screw 1)
of the dryer rack. Pull out the rack on the
telescopic rails by approx. 10 mm.
Turn the hand wheel (2) counter-clockwise,
to ensure that the paper is transported into
the dryer rack.
Once the paper is completely inside the
dryer rack, the rack can be pulled out.
AgfaPhoto
Advertisement
Table of Contents
