Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
8.5.7
Cleaning the Dryer Rack
Special tools
– Screwdriver or coin
– Lint-free cloth and warm water
CAUTION!
The dryer is quite hot during operation. Risk of burning!
Allow cooling down before cleaning.
2
dlab2507
AgfaPhoto
4
1
3
Before weekends:
Remove the dryer cover. Use a coin to turn
the lock by 90º.
Loosen the locking screw (knurled screw 1)
of the dryer rack. Pull out the rack on the
telescopic rails.
Remove only the feed roller set after
unscrewing the knurled screw (2) and put it
in water over the weekend.
CAUTION!
In case the rollers are not mounted prior
to the automatic start after the weekend:
make sure to switch off the automatic
MBL to avoid paper jam (see
Settings
in Chapter 4).
On Mondays before starting work:
Wipe off all deposits on the feed rollers and
the feed plate with a damp cloth.
Clean the guide roller behind the feed rollers
with a damp cloth.
Check all foam rollers (3) for damage and
replace them if necessary.
2005-05-01 / PN 04092_01
Maintenance
8
Printer
8-51
Advertisement
Table of Contents
