Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
8.4.5.4 Sheet Distributor (SD): Remove Paper Dust and Deposits
Applies to d-lab.2plus and netlab.2plus
CAUTION!
Danger caused by toothed belts that may run in the marked area: risk of bruising.
Do not reach into the machine.
Purpose:
To avoid transport problems.
Tools and/or material
– Vacuum cleaner
– Brush
– Isopropanol, (for plastic-coated rollers, not for rubber rollers)
3
G_SD110
AgfaPhoto
Open the Printer front door.
Open the lock (1).
Pull out the sheet distributor on the
telescopic rails (handle, 2).
Remove the paper dust with a vacuum
cleaner.
Remove the pressure plate of the back
printer after unscrewing the knurled screws
(3).
Clean the pressure plate with a damp cloth
or AgfaPhoto Cleaner (see
substances
Insert the pressure plate again and fix it with
the knurled screws (3).
Clean the transport rollers with a damp lint-
1
free cloth.
Push in the sheet distributor and close the
locking levers.
2
2005-05-01 / PN 04092_01
Maintenance
Cleaning
at the end of this chapter).
8
8-27
Advertisement
Table of Contents
