Film Mask: Slide; Applies Only To D-Lab.2/2Plus - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

d-lab.2, d-lab.2plus, netlab.2plus: Operation

4.8.1.4 Film Mask: Slide

Settings and Configurations

If the Order configuration screen was

called up with New: Press Config. type and

select Single.

The Film type Slide is fixed and cannot be

Press PpF (number of prints per frame) and

enter the desired value:

preset value = 1 (range 0 to 999).

Sub-configurations (Indexprint, Backprint,

Correction, Autosave, Front print): press

the button and select the respective sub-

configuration from the list or set to Off.

If border prints are to be printed:

Press Border and enter the required

Possible values: 4–60 mm

Presetting: 0 (for borderless).

Press Border color and select the desired

Press Paper config. and select the

respective configuration.

Press Cut length and select the respective

Press Save or Save as and enter the name.

2005-05-01 / PN 04092_01