d-lab.2, d-lab.2plus, netlab.2plus: Operation
6.7.2
Save Images Only, Without Printing
AgfaPhoto
Call up the print mode (see
this chapter).
Select the order configuration,
which includes an Autosave configuration
–
Defining and Editing Autosave
(see
Configurations
and
Defining and Editing
Order Configurations
in which PpF (prints per frame) = 0 (if this
–
is not the case, set PpF = 0 for this order;
Changing the Configuration for All
see
Images of an Order
in this chapter).
Then proceed as described for the respective
Printing
print mode (see
2005-05-01 / PN 04092_01
Production
Printing
in
in Chapter 4), and
6
in this chapter).
6-101