Avoiding Problems - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

d-lab.2, d-lab.2plus, netlab.2plus: Operation

If a problem that occurred cannot be solved with the methods suggested in this

chapter, call the Service Technician.

Safety Notes and Rules, for Service / Repair Routines

Avoiding Problems

Switch off the machine

Never switch off the machine with the main breaker! This may:

Applies only to d-lab.2 with gas laser, Type 8060/260, and d-lab.2plus with gas laser,

type 8060/261

reduce the service life of the blue/green laser considerably (failure of after-

2. cause problems with the main computer; the operating system may have to be

reinstalled.

The main computer should always be shut down with a regular shutdown.

3. cause paper jams if not all prints have left the Paper Processor.

Switching the Machine On and Off in Chapter 2.

Applies only to d-lab.2/2plus

Do not pull out the film carrier during a reset.

in Chapter 1.

2005-05-01 / PN 04092_01

Troubleshooting