Defining And Editing The Backprint Configurations - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.7.2

Defining and Editing the Backprint Configurations

Back print configurations can be set up for individual prints as well as for index prints.
Note
The print area for the back print is 2 x 40 characters. Positions not used are filled up
with dots.
300
AgfaPhoto
Settings and Configurations
Call up:
Press in this order:
Settings
Print configurations
Back print
The Back print configurations screen opens:
Press Film mask and select the respective
carrier:
Applies to d-lab.2/2plus
Standard back print for back print on prints
of slides and negatives with the exception of
IX240 (APS)
Applies to d-lab.2/2plus
IX 240 back print for back print on prints of
IX-240 films (APS)
File print back print for back print on prints
of digital files
Applies to d-lab.2/2plus
Standard index back print for back print on
index prints of slides and negatives with the
exception of IX240 (APS) as well as index
prints of digital files
Applies to netlab.2plus
Standard index back print for back print on
index prints of digital files
Applies to d-lab.2/2plus
IX240 index back print for back print on
prints of IX-240 films (APS).
Configurations created before and matching the
film carrier are displayed.
2005-05-01 / PN 04092_01
4
4-87