Order Handling - AgfaPhoto d-lab.2 8060/260 Operation Manual

Production
6.1.3

Order Handling

Print modes Autoprint / Reorder / Manual positioning / Slide print / Slide Film
Applies only to d-lab.2/2plus
6-6 2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Mount the matching film carrier or slide
Changing the Film Carrier
carrier (see
this chapter).
Note
The slide mask must be inserted to print
mounted slides in the Slide print mode. To
print negatives or reversal film strips insert a
film mask corresponding to the film size.
Note
The machine detects the film masks and slide
masks automatically. Each change of the film
mask is followed automatically by a pixel
correction (PIKO). When changing between
reversal film mode and negative film mode
there is always a shortened PIKO, even without
film mask change.
Do not pull out the carrier during this pixel
correction!
Insert the matching mirror box
Changing the Mirror Box
(see
chapter).
Insert the paper magazine with the required
paper (width, surface) (see
Paper Magazine and Inserting Paper
chapter).
Select a print mode (see
Print Modes Autoprint / Reorder / Manual
Positioning / Slide Print / Slide Film
chapter).
If necessary change settings (change order
number, select or change configuration; see
Changing the Order Number
Selecting or Changing the Configuration
this chapter).
Activate the preview if wanted.
in
in this
Changing the
in this
Printing in the
in this
and
in
AgfaPhoto