d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.8.5
Defining a Configuration as Standard Configuration
For each film mask (netlab.2plus: only File print mask possible) a single or another order
configuration must be defined as standard configuration. This configuration is shown in
the first position in the configuration list and is used automatically:
after the start,
–
– Applies only to d-lab.2/2plus
after changing the film carrier,
after changing the print mode.
–
AgfaPhoto
Settings and Configurations
How to call up and define a configuration as
standard:
Press in this order:
Settings
Print configurations
Order
Applies to d-lab.2/2plus
Press Film mask and select the required
option from the list:
The corresponding order configurations,
which were set up before are listed.
Applies to netlab.2plus
Film mask is fixed: File print.
The corresponding order configurations,
which were set up before are listed.
Select the desired order configuration and
press Edit.
2005-05-01 / PN 04092_01
4
4-125