Table of Contents
Advertisement
Production
6.6.1
Index Prints in the Different Print Modes
Which images and which type of images can be combined in an index print depends on
the respective print mode:
– Applies only to d-lab.2/2plus
Autoprint without preview:
All frames are shown on the index print with the corrections of the configuration in
use.
– Applies only to d-lab.2/2plus
Autoprint with preview:
All scanned negatives are shown on the index print with the corrections used for the
first print. Additional manual corrections are not considered for images already in
preview. Changes kept for all other images with the Hold function are also considered
on the index print for these further images.
Each negative appears only once on the index print, even if it was printed in several
versions.
– Applies only to d-lab.2/2plus
Reorder:
All scanned images appear once on the index print. The layout defined in the
configuration for the first image is used as the standard. This setting can be modified.
– Applies only to d-lab.2/2plus
Package:
All scanned images appear once on the index print.
File print:
–
All files of the order are included.
Network order from workstations:
–
If an index print is requested in the descriptive order file, it is printed with all files of
the order.
Note
Applies only to d-lab.2/2plus
Index prints are not possible in Manual positioning mode.
6-96
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
AgfaPhoto
Advertisement
Table of Contents
