Checking And Calibrating The Solution Temperatures; Cleaning Or Replacing The Air Filters - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
8.5.2

Checking and Calibrating the Solution Temperatures

Setting Temperatures and Calibrating Sensors
See
8.5.3

Cleaning or Replacing the Air Filters

Let washed filters / filter mats dry well before putting them back.
Do not wring, bend or press them hard.
Do not let them dry in the sunshine.
Note
The service life of the filter mats depends on the air conditions at the operation site
and on the operation time of the machine. In case of long operation times and
unfavorable air conditions, the filters must probably be replaced more often.
5
G_GG201_5 shows d-lab.2)
AgfaPhoto
in Chapter 4.
6
1
3
4
Position of the air filters:
1 Lamphouse (only d-lab.2/2plus)
2 AC power supply and dryer
3 CCD fan (only d-lab.2/2plus)
4 Below the cutter units
5 Printer side door
Note
Cleaning and replacement of the air filters 1–5
are explained below. For cleaning and
replacement of air filter 6 see
paper outlet (PO)
2
2005-05-01 / PN 04092_01
Maintenance
Cleaning the
in this chapter.
8-41
8