Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
2.5.9.1 Sleep Mode
In sleep mode scanner, Printer and Paper Processor are switched off, the main computer
remains on for the set time. This allows e.g. checking of statistics (on site or via remote
access).
The sleep mode can be activated for any weekdays as desired (see
Chapter 4).
2.5.9.2 Switching the Machine Off
The preset settings for the next automatic switch-on (date, time) for this day are shown on
the top right, and for switch-off top left (see
(Timer)
in Chapter 4).
041
AgfaPhoto
General Description, Work Routines and Operation
Setting the Timer
Note
Applies only to d-lab.2/2plus
Any negative carrier may be in the machine
when it is switched off.
Press End of work in the menu bar.
Press Shutdown.
The Shutdown screen opens.
Setting startup and shutdown times
If the displayed settings should not be valid
for the next automatic switch-on (startup):
If the sleep mode should be deactivated for the
next automatic switch-off:
Press Sleep mode
Note
The time for the automatic shutdown cannot
be changed here. If the Sleep mode has been
activated in the presettings, it cannot be
activated here.
These settings can be changed in the Startup
settings screen (press the buttons Settings >
Machine settings > Startup; see
startup and shutdown times (Timer)
Chapter 4).
2005-05-01 / PN 04092_01
in
Press Change Timer.
In the following screen enter date and
time for the next start, if necessary
switch the timer on or off and confirm
with OK.
Press Next Login.
Select the user for the next login from
the listing.
2
Setting
in
2-25
Advertisement
Table of Contents
