Table of Contents
Advertisement
Production
6.3.6
Working with the Slide Film Print Mode
Applies only to d-lab.2/2plus
Print mode to print strips of reversal or single unmounted slides (option; only available
Installing / Activating Software
after activation, see
Slides of film type 135 as well as film type 120/220 can be processed.
Note
Preview is always active in the Slide film mode.
Note
Order configurations of the package type cannot be used for reversal films.
Note
The scratch correction must be switched off for the printing of black-and-white slides.
6.3.6.1 Activating the Print Mode
151_start
6-76
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
in Chapter 4).
Call up:
Press in this order:
Print mode
Slide film
The scanner will be calibrated: Duration about
7 seconds. Do not remove the film carrier during
this time!
AgfaPhoto
Advertisement
Table of Contents
