Maintenance Routines Every 6 Months; Cartridge Feeder: Cleaning The Mechanism And Light Barriers Applies Only To D-Lab.2/2Plus; Maintenance When Required; Removing The Dust From The Lens Applies Only To D-Lab.2/2Plus - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
8.6

Maintenance Routines Every 6 Months

8.6.1

Cartridge feeder: Cleaning the Mechanism and Light Barriers

Applies only to d-lab.2/2plus
Special tools
– Compressed air spray
8.7

Maintenance When Required

8.7.1

Removing the Dust from the Lens

Applies only to d-lab.2/2plus
Special tools
– Compressed air
AgfaPhoto
Remove the housing of the cartridge feeder.
Clean the mechanical parts and light barriers
with the compressed air spray.
Note
Make sure that dust and lint are not blown into
the film carrier area.
Remove the mirror box towards the front.
Pull out the film carrier.
Push the prescanner to the right by hand.
Clean the lens cover glass with compressed
air.
Put back the film carrier and the mirror box.
2005-05-01 / PN 04092_01
Maintenance
8
8-57