Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.8
Defining and Editing Order Configurations
Order configurations combine various sub-configurations and are used to produce a
certain print result of an image material (paper format, back print, probably index print
etc.). Since order configurations refer to sub-configurations these must defined before
Defining and Editing Print Configurations
(see
A created sub-configuration can be used in any number of order configurations.
We differentiate four types of order configurations:
Single
–
single order configuration
Package}
–
Several order configurations (Single, Combi-print, Reproduction) are packed in a
package to print various formats of one image in one print pass..
Combiprint
–
The combi-print configurations can be used for multiple printing of one image in
different sizes or the same size (e.g. passport/ID photo) on one sheet of paper.
Reproduction
–
For digital images, this order configuration will switch off all functions of the
AgfaPhoto image enhancement so that the prints correspond exactly to the original.
This also refers to the computing of the print size. The printed image corresponds
precisely to the original: in case of deviating sizes there is a border or loss of image
information.
Application: images created with an image processing program or exposures that are
artificially falsified.
AgfaPhoto
in this chapter).
2005-05-01 / PN 04092_01
Settings and Configurations
4-109
4
Advertisement
Table of Contents
