Table of Contents
Advertisement
Troubleshooting
7.7.3
Paper Jam in the Transport Unit (TU)
Applies to d-lab.2
A paper jam in the transport unit may occur in the following positions:
transfer sheet bridge (SB) / transport unit (TU)
–
lower paper channel
–
upper paper channel
–
CAUTION!
In case of a paper jam in the transport unit (TU) always pull out the print engine
(PE) first and then the transport unit!
Otherwise paper which may be in the transfer area of transport unit / print engine
may damage the machine (paper guides, transport rollers, etc.) or if the paper
tears, small paper pieces may remain in the machine and result errors during
production.
A paper jam in the transport unit is indicated by an illuminated red LED.
Only if the green LED is on the transport unit can be pulled out (analog to paper
magazines)!
Pulling out the print engine (PE)
1
2
dlab2005
7-16
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Open the Printer side door.
Open the levers of the print engine: two
levers (1).
Pull out the print engine (2) completely.
AgfaPhoto
Advertisement
Table of Contents
