Table of Contents
Advertisement
General Description, Work Routines and Operation
2.5.8
Log-in of Another User
072
2.5.9
End of Work and Shutdown
Depending on the set-up in machine settings, the machine can be
completely switched off or
–
partly switched off (set to sleep mode) via menu command (see
–
Note
The Minilab switches off automatically if no further entries were made within an
adjustable time after startup (see
2-24
2005-05-01 / PN 04092_01
Setting the Timer
in Chapter 4).
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Press End of work in the menu bar.
Press Change user.
The Change user login screen is displayed.
Press Logout.
The present user is logged out.
Note:
After Logout was pressed the machine can
only be operated again with login of a user. By
this function the machine can be protected
form unauthorized use, e.g. during breaks.
Press the name of the respective user in the
list of names (use the arrow keys to scroll, if
necessary).
Press Password and type the password (four
characters).
Press Login:
If the new user has another language
assigned in the machine settings, all texts
will now be displayed in this language (see
Defining Users and Assigning Rights
Chapter 4).
below
).
in
AgfaPhoto
Advertisement
Table of Contents
