Production
6.3.5
Working with Slide Print Mode
Applies only to d-lab.2/2plus
Note
Preview is always active in the Slide print mode.
Note
The scratch correction must be switched off for the printing of black-and-white slides.
General procedure: insert slide, scan, edit, print, remove slide and insert next slide, etc.,
i.e. do not scan several slides without printing in between.
6.3.5.1 Activating the Print Mode
dlab2603
dlab2602
6-72
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Insert the slide carrier.
An automatic pixel correction is made. Do
not withdraw the slide carrier during this
procedure!
Press in this order:
Print mode
Slide print
The top part of the carrier moves out and the
Slide print screen opens (see
next page
).
AgfaPhoto