Order Tracing; Changing The Order Number - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

Advertisement

Production
6.1.4

Order Tracing

During printing an order number is assigned to each order. This order number can be
printed on the back of the print together with various other information (see
and Editing Back Print Configurations
and film.
Applies only to d-lab.2/2plus
The film and the envelope must be identified so that an order can be traced and the
envelope, the film and the prints can be combined. For this, stickers with numbers (Twin
Check labels) are used. The same number is put on the order envelope and on the film tip.
Applies only to d-lab.2/2plus
When the prints are in the sorter bucket, the film is cut into strips and sleeved into
transparent sleeves in an optional film sleever, e.g. AgfaPhoto FS1. The strips and the
prints are put in a photo bag which is then inserted in the order envelope.
With the optional accessory Pricing Software and Label Printer orders can be priced and
price labels can be printed (see
(Option)
in this chapter and in the
6.1.5

Changing the Order Number

If you call up a print mode the corresponding screen opens. The order number is displayed
in top left corner.
After switching on or after a reset of the Minilab the order number is always set on 1. For
further order it then increments automatically, even if the print mode is changed.
If the machine is set up accordingly the order number can be changed (Order no. >
Other Settings
manual; see
no. > automatic has been selected.
042_start
6-10
2005-05-01 / PN 04092_01
in Chapter 4). This simplifies the allocation of prints
Pricing Settings
in Chapter 4,
Operating Instructions
in Chapter 4). It cannot be changed if the option Order
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Defining
Printing Price Labels
Label Printer
delivered with the
Press Change?
Enter the desired order number (3 digits) and
confirm with OK.
If the number exists already, a prompt comes up
whether to overwrite the order.
For the following orders the order number will be
incremented starting with the entered number.
).
AgfaPhoto

Advertisement

Table of Contents
loading

Table of Contents