Film Mask: Ix240; Applies Only To D-Lab.2/2Plus - AgfaPhoto d-lab.2 8060/260 Operation Manual

Table of Contents

d-lab.2, d-lab.2plus, netlab.2plus: Operation

4.8.1.3 Film Mask: IX240

Settings and Configurations

If the Order configuration screen was

called up with New: Press Config. type and

select Single.

The Film type Color negative is fixed and

cannot be changed.

Press PpF (number of prints per frame) and

enter the desired value:

preset value = 1 (range 0 to 999).

Sub-configurations (Indexprint, Backprint,

Correction, Autosave, Front print): press

the button and select the respective sub-

configuration from the list or set to Off.

If border prints are to be printed:

Press Border and enter the required

Possible values: 4–60 mm

Presetting: 0 (for borderless).

Press Border color and select the desired

Adapt Paper config. and Cut length for the

sizes Classic, High Vision and Panorama:

press the buttons and select the desired

settings (see

Press Save or Save as and enter the name.

2005-05-01 / PN 04092_01