Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
6.1.7
Inserting Films and Slides
Applies only to d-lab.2/2plus
Insert film (formats 110, 120, 135) and unmounted slides
The films or film strips (reversal or negative film) are inserted via the film feeder. The
operator inserts the film between the feeder guides with the emulsion side turned down.
The machine detects the film and pulls it in automatically.
After scanning and printing the films of type 135 are ejected downwards into the film box.
So the next film or film strip of type 135 can be inserted while the first film is still being
printed. Films of size 120 are returned through the film feed.
Note
Single negatives or single slides are inserted directly in the film carrier.
Insert mounted slides
Mounted slides are inserted directly in the slide carrier. When you call up the slide mode,
the upper part of the slide carrier opens automatically:
Insert APS film
CAUTION!
To be observed when working with APS films:
Do not fold the film as otherwise the magnetic code cannot be read in this spot.
–
Do not expose the film to strong magnetic fields as otherwise the magnetic code will
–
be deleted.
Do not splice the film in the area of the magnetic tracks as otherwise the magnetic
–
layer may come off when the splice is removed.
APS films are rewound into the cartridge after development and are kept there.
An APS film cartridge is smaller than a 135-type film cartridge.
As the customer cannot see the APS film, the film status is indicated on the cartridge.
AgfaPhoto
Insert the slide with correct orientation.
Push in the upper part of the slide carrier.
2005-05-01 / PN 04092_01
Production
6
6-19
Advertisement
Table of Contents
