Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
4.6.3
Settings for Network Orders
Settings for the printing of network orders. Network orders can be started automatically or
manually (see
Network orders in Chapter 6).
Automatic printing of network orders: If the Automatic printing function is activated, the
minilab automatically switches to Network order printing mode during printing intervals
(no operators activities within an adjustable time) and automatically prints the waiting
orders.
AgfaPhoto
Settings and Configurations
In the Remote Orders: settings screen:
Activate / deactivate Automatic printing
On/Off.
Press Popup to start the network orders
appears after ....
Enter the time span without operator action
after which the popup for network order is to
be displayed (5 minutes are preset).
Press Popup stays active for ....
Enter the time after which the printing of
network orders is started automatically if no
operator action takes place (1 minute is
preset).
Press Maximum number of network
orders and enter the number of network
orders, which are to be loaded in one process
(highest adjustable value: 200).
Press dTFS mode and select the desired
settings (for dTFS function see
Function (digital Total Film Scanning:
Measuring of Digital Image Sources
chapter).
always On: dTFS is generally used.
–
Exceptions are determined by selection
The dTFS Function (digital
criteria (see
Total Film Scanning: Measuring of Digital
Image Sources
in this chapter). They have
the same effect here.
always Off: All images are printed without
–
dTFS (no image enhancement).
PfDF: The settings defined for dTFS in
–
Network orders apply.
2005-05-01 / PN 04092_01
4
The dTFS
in this
4-81
Advertisement
Table of Contents
