Table of Contents
Advertisement
Troubleshooting
7.8.6
Paper Jam between the Feeder Unit FU and Sheet Distributor SD
Applies to d-lab.2plus/netlab.2plus
3
G_SD111
7-38
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Open the Printer front door.
Open the lock (1) and pull out the sheet
distributor SD at the red handle (2).
Turn the hand-wheel (4) to advance the
sheet into the sheet distributor: at least by
10 turns.
Remove the sheet.
If necessary remove the pressure plate of the
back printer (two knurled screws, red, 3), to
remove paper in this area.
Mount the pressure plate again.
Push in the sheet distributor and lock it (1).
1
4
Close the Printer front door.
2
AgfaPhoto
Advertisement
Table of Contents
