Production
6.4.2.2 Setting a Border
074
Note
the border is not shown in this screen. It will only be shown in the screen in which
Special was activated.
046_rand
6-88
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Press Border (in the Special screen).
The screen Enter border (color border) opens.
Press width and enter the value.
Press Colour.
The screen Select color opens.
Select the color and press OK.
or
Select Color.
Press New.
Specify the red, green, and blue
portion in the following screen to create
the desired color.
Press OK twice.
The Special screen opens again.
Press OK.
The screen in which Special was activated is
displayed again.
AgfaPhoto