Screen Remains Gray For More Than 3 Minutes After Reset - AgfaPhoto d-lab.2 8060/260 Operation Manual

d-lab.2, d-lab.2plus, netlab.2plus: Operation
7.6.3

Screen Remains Gray for More Than 3 Minutes after Reset

1
G_GG212_3 (Fig. shows d-lab.2)
G-PC713_3 (Fig. shows netlab.2plus)
AgfaPhoto
1
If after this, the machine does not perform a
reset automatically, exit the error list and
trigger the reset manually.
If the reset is unsuccessful, the
corresponding message covers up all
relevant error messages. To make them
visible again, open one of the two front
doors: the large error popups are displayed
again.
If the loop – unsolved errors appearing again
and again – cannot be interrupted, press the
ON key.
Initiate another reset:
press the ON key (1).
2005-05-01 / PN 04092_01
Troubleshooting
7
7-9