d-lab.2, d-lab.2plus, netlab.2plus: Operation
7.7.8
Paper Jam between Lane Distributor (LD) and
Sheet Transfer (ST)
Applies to d-lab.2
4
G_GG221
AgfaPhoto
2
1
3
Unlock the latch (1, red) (by pulling).
Remove the cover (2).
Lift the sheet transfer holding it by the
handle (3) and take it out.
Remove the paper.
Verify that all belts are positioned correctly.
Mount the Sheet Transfer again.
Observe the two engaging lugs (4).
Mount the cover (2).
Pull out the locking pin (1, red), to let the
cover engage, and then release again.
2005-05-01 / PN 04092_01
Troubleshooting
7
7-25